200W Electric Hot Knife Foam Cutter Tool Foam sculpture hot knife Hand Held

Description

1, 200W Electric Hot Knife Foam Cutter Tool with Blades 6" & 8" Straight Blades
This tool kit complete with one 200W Hot Knife one pcs 6'' & 8 '' Blade Variable Power Control
Temp.of blade:6-8 seconds heating up 500°C
No rough burr after cutting; Durable and Practical;Long life span and can non-stop run;Much lighter and easier for shipping with low freight cost
Notices:Intermittent operating for the tool, suggest that loosen the switch for a second after 15 seconds’ working (otherwise it may cause overheat of the power tube)
Product description
Style:
Hot Knife With Straight Blades
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Specification:
Voltage: 120V±10%
Frequency:50/60Hz
Power: 200W
Speed: Adjustable
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.2kg
2,Electric Knife Hot Knife Foam Cutter Foam sculpture hot knife cutter (Foam Cutter)
This tool kit complete with one 150W Hot Knife one pcs 15cm Blade and one pcs Groover and one pcs 30cm Bendable Blade
The styrofoam groover is combined by hot knife cutter,groover and 30mm bendable blade, used for grooving of EPS foam,EPE foam, XPS foam and sponge.The hot knife cutter used in groover can be model FC100,FC150,FC200,FC250. It depends on grooving area, if the grooving area is samll, it can use small power hot knife cutter, if it is large, it can use large power hot knife cutter.
150W,120V,Heats up in just about 10 secondsLong life span and can non-stop run;No rough burr after cutting; Durable and Practical.
It can used todether with different type blades,and it can be used for cuting different materials
Notices:Intermittent operating for the tool, suggest that loosen the switch for a second after 30 seconds’ working (otherwise it may cause overheat of the power tube)
Product description
Style:
Foam Cutter
Used for cutting EPS foam ,EPE foam, XPS foam, sponge etc. without chippings. Use together with the groover(G02) and the bendable blade, it can do various shape grooving. Use together with the small groover(G01), can grooving for tube seat. Use together with blade clamp(C06) and bendable blade, can used for foam sculpture.
Specification:
Voltage: 120V±10% Frequency:50/60Hz
Power: 150W
Speed: Adjustable
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.1kg
Accessories:
One pcs 15cm blade
One pcs allen key
One pcs copperbrush
One pcs plastic tool box
One pcs groover
3,Electric Knife Hot Melting Cutter Cloth Ribbon Electric heating knife Foam cutting PVC Rope Nylon Rope Cutting (Hot Heating Knife Cutter Tool arc)
Temp.of blade:6-8 seconds heating up 500°C
No rough burr after cutting; Durable and Practical.
Long life span and can non-stop run.Much lighter and easier for shipping with low freight cost.
It can used todether with different type blades,and it can be used for cuting different materials
One year warranty (not include blade).
Product description
Style:
Hot Heating Knife Cutter Tool arc
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Specification:
Voltage: 120V±10%
Frequency:50/60Hz
Power: 100W
Speed: Adjustable
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.1kg
4,Electric Knife Hot Melting Cutter Cloth Ribbon Electric heating knife Foam cutting PVC Rope Nylon Rope Cutting (20cm blade)
Temp.of blade:6-8 seconds heating up 500°C
No rough burr after cutting; Durable and Practical.
Long life span and can non-stop run
Much lighter and easier for shipping with low freight cost
It can used todether with different type blades,and it can be used for cuting different materials
Product description
Style:
20cm blade
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Specification:
Voltage: 120V±10%
Frequency:50/60Hz
Power: 80W
Speed: Adjustable
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.1kg
5,Electric Knife Hot Melting Cutter Cloth Ribbon Electric heating knife Foam cutting PVC Rope Nylon Rope Cutting (30cm bendable blade)
Temp.of blade:6-8 seconds heating up 500°C
No rough burr after cutting; Durable and Practical.
Long life span and can non-stop run
Much lighter and easier for shipping with low freight cost
It can used todether with different type blades,and it can be used for cuting different materials
Product description
Style:
30cm bendable blade
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Specification:
Voltage: 120V±10%
Frequency:50/60Hz
Power: 80W
Speed: Adjustable
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.1kg
6,Electric Knife Hot Melting Cutter Cloth Ribbon Electric heating knife Foam cutting PVC Rope Nylon Rope Cutting (Groover)
It use with 150W 150W Hot Knife
No rough burr after cutting; Durable and Practical.
Product description
Style:
Groover
packing: one set groover
7,Big Sharp Blade
for plastic film hole saw and cutting
Product description
Style:
big sharp blade(B07)
big sharp blade for plastic film hole saw and cutting
8,Electric Knife Hot Melting Cutter Cloth Ribbon Electric heating knife Foam cutting PVC Rope Nylon Rope Cutting (cutting guide)
Temp.of blade:6-8 seconds heating up 500°C
No rough burr after cutting; Durable and Practical.
Long life span and can non-stop run
Much lighter and easier for shipping with low freight cost
It can used todether with different type blades,and it can be used for cuting different materials
Product description
Style:
cutting guide
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
Specification:
Voltage: 120V±10%
Frequency:50/60Hz
Power: 80W
Speed: Adjustable
Temp.of blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.1kg
9,Polystyrene cutter Hot Wire Foam Cutter Table
This is a professional hot wire cutter for insulation board.The block is ready in a few seconds by the release button.
The hot wire cutter for cutting insulation foam such as styrodur, polystyrene (EPS or XPS foams) and non-plasticized foam
For cutting Styropor sheets used for insulating walls. For example for cutting of gable or roof window frames; modelmaking, floor heating insulation etc.
Product description
Style:
Hot wire foam cutter
Max. cutting length: 1370 mm
Max.cutting thick :300 mm
Guide : 1000mm; 0-90°
Weight: 16kg
Dimensions: 171cmX40.3cmX16cm
Transformer: 40V / 200W / 120V
Operation blinking can: 15s on /45s off
10,Desktop hot wire foam cutting machine
This is a true professional-grade hot cutting tool, for cutting different density foam with fine cutting edge, no mess. Desktop device, provides the cutting plane,operation is simple and convenient . Cutting requires no special training or skills, and allows you to create straight edges or complex shapes .
Product description
Style:
foam cutting machine
Supply voltage：110V
Power input：160W
hot wire angle：45°-90°
Temp. of hot wire：500℃
Total weight： 20kg
Power cord length：3M
Power source：Elextricity
Hot wire length：Adjustable