50KHz-200MHz 50KHz-2GHz Malachite IPS DSP SDR Shortwave Radio Receiver + Antenna

Description

Home
Arduino
Module
Sensor
Chips
About Us
Type #1 3.5" 50KHz to 200MHz
Advantages:
- Aluminum alloy shell
- Malahit DSP SDR Receiver
- 3.5" IPS display touch screen
- Default frequency range: 50KHz-200MHz
- Demodulation mode: AM, SSB, NFM, WFM
Product Parameters:
1) The radio is constructed based on SDR principle, and the function is determined by loaded software.
2) The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker, AGC, equalizer.
5) Use fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied.
7) 3.5-inch IPS display touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply is supplied by the external TYPE-C (for Huawei mobile phone) interface and can be charged by TYPE-C. The internal battery voltage is 3.7V and the capacity is 2500mAh.
11) The current consumption when listening to headphones is 300mA.
12) Built-in receiving module in order to improve the HF reception on antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
13) Connect to a computer via USB, you can transmit CAT, IQ and audio.
14) 160 kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, 0.3μV = 10dB at s / w.
16) Thanks to the characteristics of the msi001 chip used, dynamic blocking range is about 85dB.
17) There is backlight control.
18) SMA female antenna socket;
19) Dimensions 102 x 74 x 29mm (excluding sizes of protrusions).
20) Weight 240g.
Package Included:
1 x SDR Receiver
===============================================================
Type #2 50KHz to 2GHz  3.5inch
50K-2G full frequency receiver offline handheld SDR malachite radio registered version
Malachite SDR registered version 50K-2G
Product parameter introduction:
1) The radio is constructed based on the SDR principle, and the function is determined by the loaded software.
2) The frequency range is from 50kHz to 200MHz (default version)/from 50kHz to 250
MHz, 400MHz to 2GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppression
Device,
NoiseBlanker, AGC, equalizer.
5) Use the fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480MHz is applied.
7) 3.5-inch IPS display with touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply and charging are powered by the external TYPE-C interface. Built-in 3.7V 2500mAh
Lithium polymer battery.
11) Built-in 8 ohm 1W speaker, consumption current is 300mA.
12) In order to improve the HF reception on the antenna, a built-in receiver module has been developed with a source follower
The add-on board for the add-on. The board will be built into the standard receiver design.
13) Connect to a computer via USB, which can transmit CAT, IQ and audio.
14) 160kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, 0.3μV=10dB at s/w.
16) Due to the characteristics of the msi001 chip used, the dynamic blocking range is about 85dB.
17) There is backlight control.
18) SMA female (outer screw and inner hole) antenna socket;
19) Dimensions 102X74X23mm (excluding protrusions).
20) The weight is about 300g.
Note: The default standard configuration is only the host; other chargers and antennas are separately equipped.
Register the upgraded version to broaden the frequency and increase CW decoding and other functions.
Note:
- The default standard configuration is only the host; Other accessories, such as antenna are not included, please purchase separately.
- Default frequency range: 50KHz-200MHz. If other frequency ranges are needed, please contact customer service staff to know more details and pay extra money.
- 400 MHz to 2 GHz (registered upgrade version) broadens the frequency and increase CW decoding and other functions.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.