Electric Hot Knife Ribbon Rope Cutter Melting Fabric Cloth PVC Rope Nylon Heal

Description

Electric Hot Knife Ribbon Rope Cutter Melting Fabric Cloth PVC Rope Nylon RopeHealing Cutting Kit
[Specification]:
Voltage: AC 110V/220V,50/60Hz;
Weight: 950g;
Power: MAX.60W;
Power cord length: 2.5m;
Intermittent operation: 1/4min.
[Application]:
Cut the rope with diameter 2cm, and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cut the synthetic fiber cloth without backup under the cloth, seal the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth.
[Preparation]:
Insert each leg of the blade and tighten the knurled nuts. Make sure that the blade and the cutting head have optimal contact. If both legs of the blade are not properly installed, the unit will not heat up.
[Cutting]:
Avoid direct short circuit between cutting heads; Clean cutting heads with enclosed wire brush; Please make sure the blade is connected to the cutting material before blade heats up.
[Guarantee And After-Sale Service]:
One year guarantee for whole knife except of blade, in-time technical support by e-mail.