Inflatable Swimming Pools Above Ground Pool With Air pump Kids Family Outdoor

Description

Feature:
🏊【High Quality Material】The high-strength hot carbon tough PVC layered independent airbag adopts reinforced thermal fusion technology, which is firm and not easy to break.
🏊【Upgraded air Leak-proof Valve】Each layer of the airbag has an upgraded version of the leak-proof valve, which is highly sealed to prevent air leakage.
🏊【Quick Setup】Easy setup with air inflation through valves and fill with water, then you can enjoy water immediately.
🏊【Spacious size for your choice】120in×72in×20in.
🏊【100% Customer Satisfaction】All our products are shipped from the United States, and the transportation and logistics time is 1-2 weeks. We aim to provide satisfactory products for our customers. If you are not 100% satisfied, please feel free to contact us by Message. Hope you can enjoy the entire shopping experience.
Sizes:120in×72in×20in.
Material: High-strength hot carbon tough PVC layered independent airbag
Instructions for use:
After unpacking, unfold it completely and lay it flat on a clean and smooth ground.
From the bottom to the top, inflate layer by layer, inflate to 90% -95% saturation, and then press down to parallel to the body of the pool.  add cold water .
After use, open the bottom drain plug. After the water is drained, place the swimming pool in the shade and dry it. Then open the vent valve, completely deflate and put it in a PE bag and place it in the shade.
Packing List:
1x Swimming Pool.
1x Air pump.
Note:
Please be careful not to use a knife or other sharp tools when unpacking. Do not inflate too much, because it is a plastic material, the principle of thermal expansion and contraction of rubber, inflatable products have their own "God extendibility, due to the size system 、 The difference between the inflation saturation and the measurement method. When you first receive the goods, the size will be small, there may be an error of about 5-10 cm, and it will return to normal after you charge more times.
The size measurement is: to measure from the position of the inflation nozzle.
On Mar-31-21 at 03:25:17 PDT, seller added the following information: