-40%

PortaPack Porta Pack + Hack RF One SDR + Case +Antenna 0.5PPM TXCO GPS Simulator

$ 131.47

Availability: 82 in stock
  • MPN: Does not apply
  • Condition: New
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money Back
  • Brand: Unbranded

    Description

    Product Overview
    PortaPack Porta Pack + HackRF One SDR + Case +Antenna 0.5PPM TXCO GPS Simulator
    Detail
    With touch screen
    The hackrf one is inlcuded and it is open source and made in china
    Havoc Firmware is installed, and you can flash the firmware from the below link:
    https://github.com/sharebrained/portapack-hackrf/releases
    more information you can go to this web:
    https://github.com/sharebrained/portapack-hackrf
    https://www.youtube.com/results?search_query=PORTAPACK
    Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case.
    Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware)
    According to source code: github.com/sharebrained/portapack-hackrf
    Redesign this hardware and share it to the enthusiast.
    Progress of work:
    1. has completed the program validation prototype.
    2. the latest 2018.10 month documents are based on improvements.
    The PortaPack is open-source -- hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports are welcome!
    Specification of PortaPack
    - 2.4 inch, 240 x 320 RGB LCD, with touch screen
    - Four-way arrow keys, rotary jog wheel, and select button.
    - Headphone/microphone jack
    - Coin battery for preserving settings and date/time.
    - Micro SD card slot for data and code storage.
    - Aluminum case
    SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
    Wideband (18MHz) spectrum analysis and waterfall.
    Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
    HackRF mode runs HackRF firmware for use with host computer SDR software.
    PPM calibration for more accurate tuning.
    Sleep mode saves power by turning off just the display.
    You may also find the Furrtek HAVOC firmware very interesting!
    Some assembly is required. The assembly steps are documented in the support wiki and videos.
    Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
    PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
    PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
    The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.
    Specification of Hackrf one:
    half-duplex transceiver
    operating freq: 1 MHz to 6 GHz
    supported sample rates: 2 Msps to 20 Msps (quadrature)
    resolution: 8 bits
    interface: High Speed USB (with USB Micro-B connector)
    power supply: USB bus power
    software-controlled antenna port power (max 50 mA at 3.3 V)
    SMA female antenna connector (50 ohms)
    SMA female clock input and output for synchronization
    convenient buttons for programming
    pin headers for expansion
    portable
    open source
    Package include:
    1 x Finished PortaPack Porta Pack + Hack RF One SDR + Case
    1 x Antenna
    1 x USB cable
    Shipping Policy
    Payment Mathord
    Returns Policy
    Shipping Policy
    1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
    2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.
    3.
    Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
    Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
    Less than , without free tracking number,if you request tracking number,please send ebay message to us.
    Over ,with tracking number free.The shipping time depends on your location and local postal service,as well as the  weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get the package.
    4.
    Express shipping: DHL/FEDEX/EMS,Extra  -- will be charged for the first 500 grams for most countries. Contact us if  you need this service.
    Payment Mathord
    PayPal payment accepted only.
    Returns Policy
    1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
    2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date.
    3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.