QRP SSB/CW Transceiver "KLOPIK". Motherboard of TRX. Soldering Project kit

Description

Small in size, is made discrete, this transceiver is likely designed to work QRP in CW and SSB modes in the field. However, the PSK function allows you to use it stationary, when combined with PC. "Klopik" is very popular in Russia and CIS.
"Klopik" designed to work on all Amateur HF bands in modes CW, SSB and PSK. The transceiver has a small size, which allows its use in field conditions and at the cottage. The amplifier of the transceiver to the antenna gives 30 watts
The dignity of "Klopik" are excellent repeatability, ease of manufacture of the transceiver, a small number of elements of the main Board, at least nastech elements, its small size and relatively high characteristics of the receiving and transmitting path.
The board (if soldered accurately and correctly) starts working at first power ON. To get it fine tuned - needs the screwdriver to adjust the BFO to XTAL filter (it could be done for few minutes on air without any special measurement devices)
KIT consists of all necessary components to build the motherboard of TRX.
- JFETs, capacitors, resistors, etc
- toroid, IF transformer skeleton, wire
- English manual
The kit is easy to build and recommended for beginners in ham radio.